User`s manual

Moxa E Series Managed Ethernet Switch Featured Functions
3-20
Auto-Backup-Configurator(ABC-02)
1. Click Backup to save the configuration file to the ABC-02. The file will be saved in the Moxa folder of the
ABC-02. The file name is “Sys.ini”.
The configuration file will be saved into ABC-02-USB’s “Moxa” folder, with 2 files independently. Named by
“Sys.ini” and “MAC.ini”. The purpose of saving into two files is to identify the file while using Auto load
configuration from ABC to system when boot up.
Note: MAC.ini is named by switch MAC address last 6 digits without space
2. Click Browse to select the configuration file. Then click Restore to start loading into your switch.
3. Auto load configuration from ABC to system when boot up
Select check box of Auto load configuration from ABC to system when boot up then click Apply. This
function is enabled by default.
Power off your switch first, and then plug in the ABC-02. Then power on your switch, the system will detect
the configuration file on the ABC-02 automatically. The switch will recognize the file name with following
sequence priority:
First priority: MAC.ini
Second priority: Sys.ini
If no matching configuration file is found, the fault LED light will turn on. The switch will boot up normally.
Note: MAC.ini is named by switch MAC address last 6 digits without space
4. Auto backup to ABC-02 when configuration change
Select check box of Auto backup to ABC-02 when configuration change then click Apply. This
function is disabled by default.
The ABC-02 is capable of backing up switch configuration files automatically. While the ABC-02 is plugged
into the switch, enable the “Auto backup to ABC-02 when configuration change” option. Then click “Apply”.
Once this configuration is modified, the switch will back up the current configuration under the “/His_ini”
folder in the ABC-02. The file name will be the system date/time (MMDDHHmm.ini).
Note: MM=month, DD=day, HH=hour, mm=minutes, from system time
Log File Backup
Moxa switch offers 3 ways to backup log files: the local database, remote TFTP server, and
Auto-Backup-Configurator (ABC-02).
Local
Click the Backup button to backup the log file to local database
TFTP Server
Enter the TFTP Serve IP and file name then enter the Backup button