User`s manual

Moxa E Series Managed Ethernet Switch Featured Functions
3-17
NOTE
The following events will be recorded into the Moxa switch’s Event Log table, and will then be
sent to the
specified Syslog Server:
•
Cold start
•
Warm start
•
Configuration change activated
•
Power 1/2 transition (Off (On), Power 1/2 transition (On (Off))
•
Authentication fail
•
Password change
•
Redundancy protocol/Topology changed
•
Master setting is mismatched
•
ABC-02 status
•
Web log in
•
Rate Limit on/off(Disable port)
•
Port looping
•
Port traffic overload
•
dot1x Auth Fail
•
Port link off/on
Relay Warning Status
When relay warning triggered by either system or port events, administrator can decide to shut down the
hardware warning buzzer by clicking Apply button. The event still be recorded in the event list.
MAC Address Table
The MAC address table shows the MAC address list pass through Moxa switch. The length of time(Ageing time:
15 to 3825 seconds) is the parameter defines the length of time that a MAC address entry can remain in the
Moxa switch. When an entry reaches its aging time, it “ages out” and is purged from the switch, effectively
cancelling frame forwarding to that specific port.
The MAC Address table can be configured to display the following Moxa switch MAC address groups, which are
selected from the drop-down list.