User`s manual

Moxa E Series Managed Ethernet Switch Featured Functions
3-16
Send Test Email
After you complete the email settings, you should first click Apply to activate those settings, and then press
the Test button to verify that the settings are correct.
NOTE
Auto warning e
-mail messages will be sent through an authentication protected SMTP server that supports
the CRAM
-MD5, LOGIN, and PAIN methods of SASL (Simple Authentication and Security Layer)
authentication mechanism.
We strongly recommend not entering your Account Name and Account Password if auto warning e
-mail
messages can be delivered without using an authentication mechanism.
Syslog Server Settings
The Syslog function provides the event logs for the syslog server. The function supports 3 configurable syslog
servers and syslog server UDP port numbers. When an event occurs, the event will be sent as a syslog UDP
packet to the specified syslog servers. Each Syslog server can be activated separately by selecting the check
box and enable it.
Syslog Server 1/2/3
Setting Description Factory Default
IP Address Enter the IP address of Syslog server 1/2/3, used by your
network.
None
Port Destination
(1 to 65535)
Enter the UDP port of Syslog server 1/2/3. 514