User`s manual

ioLogik R2140 User’s Manual Introduction
Hardware Reference
Panel Guide
NOTE – The reset button restores the factory default settings. Hold the button down for 5 seconds
with a pointed object such as a straightened paper clip. The RDY LED will glow red. You may
release the button after the LED turns to green.
LED Indicators
Name Action Description
red Power is on
PWR
off Power is off
red System error
green
ioLogik R2140 is functioning normally
alternating green
and red
ioLogik R2140 is in Safe Status
RDY
off Power is off or there is a power problem.
Serial flashing Serial port is receiving/transmitting data
(TB1) / (TB2)
TB3
1-5