User`s manual

ioLogik R2140 User’s Manual Introduction
Overview
The ioLogik R2140 is part of the R2000 series of ioLogik remote I/O servers, which are designed to
link sensors, transmitters, transducers, and valves to an RS-485 bus. As a Moxa Easy View device,
the ioLogik R2140 supports an optional hot-pluggable Liquid Crystal Display Module (LCM) to
view device, bus and I/O settings such as analog input value and range.
Product Features
z 8 channels of mV/V/mA analog input (AI) with wire-off detection (at 4 to 20 mA)
z 2 channels of analog output (AO) for voltage or current actuator control
z Bundled Windows utility and quick programming library for VB, VC++, BCB
z Support for SCADA software such as Wonderware InTouch and GE Intellution iFix32
z Configurable power-on and safe status AO modes
z Optional hot-pluggable LCM for status display and configuration
z NIST traceable calibration
Packing List
The ioLogik R2140 is shipped with the following items:
Standard Accessories
z ioLogik R2140 remote I/O server
z Document & Software CD
Optional Accessories
z LDP1602 ioLogik Liquid Crystal Display Module (LCM)
NOTE: Notify your sales representative if any of the above items are missing or damaged.
1-2