User`s manual

A
A
Appendix A. Liquid Crystal Display Module (LCM)
As an Easy View device, the ioLogik R2140 supports an optional detachable Liquid Crystal Display
Module (LCM) for easier field maintenance. The LCM is hot-pluggable and can be used to view the
LCM
tions. The right and left buttons enter and
enus. On the ioLogik R2140, the center button is used only when restarting the server.
server’s current settings. When plugged in, the LCM displays the ioLogik R2140 “home page,” and
pressing any button takes you to the configuration menu.
Controls
The up and down buttons navigate between the current op
exit the subm
Button Function
Up go to the previous item
Down go to the next item
Left exit the current submenu and return to the previous menu (go up one level)
Right enter the selected submenu (go down one level)
Center enter/exit editing mode
An “e” i
If the “e” is
s in t r of the display indicates that the current field can be modified.
not displayed, the may only be viewed.
LCM
he upper right hand corne
current field
Options
Display Explanation / Actions
<ioLogik R2140>
ID:01 bps:115200
This is the default “home page” showing the unit ID and
baudrate. Press the d igating the menus.
own button to begin nav
<ioLogik R2140>
server
f/w ver
er
Enter this submenu to display information about the specific
server you are viewing:
z serial number
z name
z location
z R2140
z lcm f/w v
z model name
<ioLogik R2140>
serial port
Enter t o display the RS-485 cascade port settings.his submenu t