User`s manual

ioLogik R2140 User’s Manual Cascading with Other I/O Servers
5. Both the R2110 and R2140 will appear with their unit IDs under the E2210 in ioAdmin’s
navigation panel. If a server appears off-line, open its context menu in the navigation panel and
select “Connect” to bring it on-line. Once all I/O servers are on-line, you will be able to use
ioAdmin to monitor and control each server’s I/O channels.
Removing Cascaded I/O Servers
To remove a cascaded I/O server in ioAdmin, click the desired server in the navigation panel and
“Delete I/O Server” in the context menu.
Limitations
There are some limitations when using the ioLogik R2140 as an extension module to ioLogik E2000
servers. Although each I/O channel on a cascaded module can be monitored and controlled over
Ethernet, the module will not support the following items:
y Click&Go
y Active messaging
y SNMP trap messages
y E-mail messages
y Import/export configuration file
y Upgrade firmware
4-6