User`s manual

ioLogik R2140 User’s Manual Cascading with Other I/O Servers
4. The R2110 will appear with its unit ID under the E2210 in ioAdmin’s navigation panel. If the
R2110 appears off-line, open its context menu in the navigation panel and select “Connect” to
bring it on-line. Once the R2110 is on-line, you will be able to use ioAdmin to monitor and
control its I/O channels.
Adding Two or More I/O Servers
Multiple I/O servers can be cascaded together for even more I/O channels. The following
instructions show how multiple cascaded I/O servers are accessed in ioAdmin, using the ioLogik
E2210, R2110, and R2140 as examples:
1. Verify that the E2210 has been installed and has been opened in ioAdmin. Snap the R2110 onto
the E2210, then snap the R2140 onto the R2110. Set the unit IDs for the R2110 and R2140 (“2”
and “3” in this example).
2. In ioAdmin, click the E2210 in the navigation panel and select “Add Serial I/O Server” in the
context menu.
4-4