User`s manual

ioLogik R2140 User’s Manual Using ioAdmin
Server Context Menu
The Server context menu is accessed by right clicking on the server model name in the navigation
panel.
Connect
Select this command to try re-establishing a connection over the RS-485 bus between ioAdmin and
the selected ioLogik server.
Disconnect
Select this command to drop the RS-485 connection between ioAdmin and the selected ioLogik
server.
Delete I/O Server
Select this command to remove the selected server from ioAdmin’s list of available servers.
Add Serial I/O Server
Select this command to manually add a server.
Restart System
Select this command to restart the ioLogik R2140 from a remote site
Reset to Default
Select this command to reset all settings, including console password, to factory default values.
Export System Config
Select this command to export the configuration of the ioLogik R2140 to a text file. It is strongly
recommended you use this method to back up your configuration after you have finished
configuring the ioLogik R2140 for your application.
Below is an example of the exported configuration file. The file includes information on the model,
I/O configuration, and Modbus addresses.
3-11