334 Third Edition

Installation and Configuration

NPort Server Lite User’s Manual 4-39

6. The server information will now appear in the Selected NPort Server information

window.

. Note: Click the Search button before selecting a server from the pull down menu if you add

more NPort Server Lites after the Diagnostics utility is initiated. Otherwise the new

server will not be listed in the pull down menu.

7. The check box for all ports needing to be tested should be checked (refer to the figure

in step 5). For those ports that no longer need to be tested, click inside the checked box

to remove the check mark.

8. If you do not need to change any Test Items or Communication Parameters, click

OK to return to the NPort Server Diagnostics window. Otherwise continue the

configuration process in the next sub sections.

Test Item Selection

Click the Test Item tab in the Diagnostic Config window.

The tests that you want to run should be checked. Add or remove check marks as necessary

by clicking inside the appropriate check box.