334 Third Edition

4-22 NPort Server Lite User’s Manual

Delete Server

If one of the NPort Server Lites originally installed on your system has been moved, or you

do not need the server installed on your system anymore, then you can use NPort Server

Lite Manager to delete it. First highlight the name of the server you would like to remove,

and then click on the toolbar Delete Server button.

Map Port

You may use NPort Server Lite Manager to change previously assigned COM names.

There are two options, depending on whether you want to change all port names

consecutively or only want to change one port name. Click on the Map Port toolbar

function, and then take the following steps:

Change the COM name of only one port

1. Start NPort Server Lite Manager, and then

click on the name of the server, listed in

the left info box, whose port number you

would like to change.

2. The port on this particular server will be

listed in the right info box. Click on the

port to highlight it.

3. Click on the toolbar Map Port icon.

4. Select the new COM port name you would

like to map to.

Make sure the Mapping COM number

consecutively check box is not checked.

5. Click OK to finish.