334 Third Edition

2-4 NPort Server Lite User’s Manual

Figure 2-2b. NPort Server Lite—Wall Mounting Brackets (top view)

DIN Rail

Figure 2-3. Din Rail Mounting Bracket

NPort Server Lite can also be mounted on a standard 35-mm DIN Rail. First use two

screws to attach the DIN Rail bracket to the metal plate (Fig. 2-3). Since the screw heads

are beveled, and the holes in the plate are countersunk, the tops of the screws will be flush

with the metal plate.

Figure 2-4. Din Rail Mounting Bracket—Orientation of Metal Plates

This allows the metal plate (now with the DIN Rail bracket attached) to be screwed to the

bottom of the server in such a way that it does not stick out over the edge of the server. Use

three screws to attach the metal plate to the bottom of NPort Server Lite, with the

orientation as shown in Fig. 2-4.