334 Third Edition

NPort Server Lite User’s Manual A-1

A. Telnet Console

This appendix contains instructions and illustrations that explain how to use Telnet Console

Interface. The following discussion and examples were generated by running Telnet from a

Windows NT/95/98 host.

Starting Telnet

From the Windows NT/2000/95/98 desktop click on Start and then choose Run.

As shown below, type

telnet [NPort Server Lite IP address]

in the Open text box, where [NPort Server Lite IP address] is the NPort Server

Lite’s IP address, and then click OK to begin the Telnet session.