334 Third Edition

6-4 NPort Server Lite User’s Manual

2. If the route is okay, try running

ping [server-IP-address]

from your NT/95/98 host, where [server-IP-address] is the server’s IP address.

If the server cannot be pinged, you will need to ask someone at the remote site to check

and see if the power is on, and make sure that the connection is okay. And then double

click on the server icon that has the question mark (?) on top. This will evoke NPort

Server Lite Manager to reconnect with the server.

If the problem is still not fixed, contact Moxa technical support for further information.

 You cannot find the server after rebooting your Windows NT/95/98 host.

It’s possible that you have a DHCP server on your network. Since DHCP servers can assign

IP addresses, the IP address for either the host or NPort Server Lite might have been

changed. To recover from this problem, you should:

1. Ask the administrator of your DHCP server to assign a dedicated IP address to both

your Windows NT/95/98 host and to NPort Server Lite.

2. Make sure your NPort Server Lite Manager operating mode is either Multi-Host or

Custom.

3. Change the IP address of the server to the dedicated IP address assigned by your

DHCP administrator.

4. Change the IP address of your Windows NT/95/98 host to the dedicated IP address

assigned by your DHCP administrator.

. Note: Please refer to Chapter 3 to learn how to configure your Windows NT/95/98 to the

dedicated IP address.

5. Modify the Security list to include your NT/95/98 host.

6. Save Configuration.