334 Third Edition

Installation and Configuration

NPort Server Lite User’s Manual 5-17

• There are two options to choose from when adding access. Choose Single

Host to only allow access to the computer with the given IP Address.

Choose A Group of Host to allow access to a group of computers. In the

example shown here, computers connected to the same LAN as NPort

Server Lite, and with IP addresses of the form 192.168.xxx.xxx, will all

be given access. More specific (limited or wider) access can be granted by

considering the bit-by-bit versions of both the IP Address and Netmask.

Port Status

NPort Server Lite’s serial port’s COM number can be changed by clicking on the Ports Setting button.