Installation guide

3-4
You will encounter two types of configurable fields:
The first type involves entering numbers, such as IP addresses, netmasks, etc.
For these fields, each digit is modified one at a time. The up button (U) and
down button (V) are used to modify the current digit, and the
SEL button is used
to move to the next digit. When you get to the last digit, press
SEL to enter the
number into the unit’s memory.
The second type of field involves selecting from a set of options. For these fields,
changes are made the same way that a menu option is chosen—by using the up
button (U) and down button (V) to scroll through the available options.
Consider the PARITY attribute under PORT SETTING as an example. Follow
the menu tree to arrive at the PARITY menu. The first option, None, is
displayed, along with a down arrow at the right. The down arrow indicates that
you may press the down button to see additional options..
P A R I T Y
N o n e
↓
Press the down button once to see EVEN as the second option.
P A R I T Y
↑
E v e n
↓
Press the down button again to see ODD as the third option.
P A R I T Y
↑
O d d
↓
Press the down button again to see MARK as the fourth option.
P A R I T Y
↑
M a r k
↓
Press the down button yet again to see the last option, SPACE.
P A R I T Y
↑
S p a c e
To select an option, press the select button when desired option is displayed.
NOTE: The configuration must be saved and the NPort Server Lite restarted in
order for any changes to take effect. Remember to navigate to the
SAVE/RESTART menu after you are finished making configuration changes.