Installation guide

5-15
Server/Client
Setting Value Notes Necessity
(serial to LAN)
Dest. IP addr 1 Required
Dest. IP addr 2 Optional
Dest. IP addr 3 Optional
Dest. IP addr 4
A host or a
group of hosts.
Data is sent from the NPort to
these remote IP addresses.
Optional
(LAN to serial)
Src. IP addr 1 Optional
Src. IP addr 2 Optional
Src. IP addr 3 Optional
Src. IP addr 4
A host or a
group of hosts.
Allows receipt of data from only
these specified remote IP
addresses.
Optional
Local Listen Port
valid port
number
Used by the NPort to listen for
data coming in over the Ethernet
line.
Required
Delimiter 1 (Hex)
ASCII code for
the 1
st
delimiter
Optional
Delimiter 2 (Hex)
ASCII code for
the 2
nd
delimiter
Once the NPort receives both
delimiters through its serial port,
it immediately packs all data
currently in its buffer and sends
it out the NPort’s Ethernet port.
Note: Delimiter 2 is optional. If
left blank, then Delimiter 1
alone trips clearing of the
buffer. *
Optional
blank (or 0) Disabled.
Force transmit
(ms)
1 – 65535
Forces the NPort’s TCP/IP
protocol software to try to pack
serial data received during the
specified time into the same data
frame.
Optional
*
If the size of the serial data received is greater than 1K, the NPort will
automatically pack the data and send it to the Ethernet.