Installation guide

5-5
Figure 3.1
illustrates a Host
Based / Driver
Mode topology
that consists of
two hosts that
share access to
two NPorts. The
NPort Server Pro
unit is connected
to several serial
devices, with half
of the ports
relegated to Host
A, and the other
Fig. 3.1: Host Based / Driver Mode
half to Host B. The NPort Server Lite unit is connected to two serial devices, and
can be configured so that one or both of the hosts are allowed access to these two
devices.
The following figures show the additional parameters that can be configured for
Host Based / Driver Mode. Refer to the table after the figures to see details of the
meaning of each parameter.
 Console Management
 Configurator