Installation guide

5-3
Server Configuration
Setting Value Comments Necessity
Server Model DE-xxx Set at the factory. ---
Server Name alpha-numeric
This option is useful for
specifying the location or
application of different
servers.
Optional
Serial Number alpha-numeric Set at the factory. ---
IP Configuration
Static IP
DHCP
DHCP/BOOTP
BOOTP
Choose one of the four
values at the left to
determine how the IP
address will be configured.
Required
Ethernet Status
10M bps
100M bps
Indicates the Ethernet
connection status
---
MAC Address 48-bit number
The MAC (Media Access
Control) address is a unique
identifier set at the factory.
---
(Static) IP Address
32-bit number;
default =
192.168.127.254
The current IP address;
identifies the server on the
TCP/IP network.
Required
Netmask
32-bit number;
default =
255.255.255.0
Identifies the server as
belonging to a Class A, B, or
C network.
Required
Gateway
32-bit number
IP address of the router that
provides network access
outside the server’s LAN.
Optional
Password
alpha-numeric
Console/Configurator
password
Optional
NOTE The Firmware will retry 3 times every 30 seconds until it gets the IP
settings from the DHCP/BootP server. The timeout times are 1, 3, and
5 seconds. If the DHCP/BootP server is not available, the firmware
will use the default IP address, netmask, and gateway for network
settings.