Installation guide

3-12
At this point, the Configuration
window will open to give you the
option to select or deselect
configuration items. This step is a
very important part of the Import
Configuration process. For
example, when importing the
same configuration to multiple
servers, you will probably at least
want to deselect Server Name
and IP Address. If you do not
deselect these items, then all of
the NPorts that you are importing
to will end up with the same
Server Name and IP Address!
NOTE When importing the same configuration to multiple NPorts, be sure to
deselect items such as Server Name and IP Address. Otherwise, you
will end up with more than one server with the same name and IP
Address.
When the Progress
column reads OK for
each of the servers
whose configuration is
being updated, click on
Close, located in the
upper left corner of the
Set Configuration
window, to return to the
Configurator window.