Installation guide

2-5
PComm Lite.)
NOTE You must set DIP switch 1 to the ON position to be able to establish a
console connection.
1. Plug your NPort Express’s female serial port directly into your computer’s
male RS-232 serial port, or use an appropriate converter (refer to the
Hardware Installation Guide for details).
2. From the Windows desktop click on Start  Programs  PComm Lite 
Terminal Emulator.
3. When the PComm Terminal Emulator
window opens, first click on the Port
Manager menu item and select Open, or
simply click on the Open icon.
4. The Property window opens automatically.
From the Communication Parameter
page, select the appropriate COM port for
the connection, COM1 in this example, and
19200 for Baud Rate, 8 for Data Bits,
None for Parity, and 1 for Stop Bits.
5. From the Property window’s Terminal
page, select VT100 for Terminal Type and
then click OK.