Installation guide

2-4
5. To ensure proper operation, click on the Terminal menu, choose
Preferences…, and then make sure VT100 Arrows is checked.
6. Use the keyboard arrow
keys to highlight
[serverConfig] as
shown below, and then
press Enter.
7. A window showing
the various
parameters required
to configure the
NPort opens up, with
configurable
parameters enclosed
in square brackets.
8. Use the keyboard arrow keys to position the cursor over the first digit of the
IP address. Type in the correct IP address and then press Enter to accept this
value.
9. Press ESC to return to the main menu, and then Restart to activate the
change.
Serial Console (19200, n, 8, 1)
NOTE This section only applies to the NPort Express Series (NPort Server
Pro and NPort Server Lite do NOT have serial console ports).
You may use the RS-232 console port to set up the IP address for the NPort
Express Family. We suggest using MOXA PComm Terminal Emulator, which is
available free of charge as part of the MOXA PComm Lite program suite, to
carry out the installation procedure, although other similar utilities may also be
used. (Please go to www.moxa.com
to download the installation program for