User`s manual

4-54 NPort Server Lite User’s Manual
Reset Port
This function allows you to restart the port manually if necessary. While resetting the port,
the port transmission process will be halted, and all temporary data will be lost.
. Note: Do not use Port Reset while transmitting IMPORTANT data.
1. Click on the port that you are going to reset to highlight it.
2. Click on Monitor and choose Reset Port, or simply click on the toolbar Reset Port
icon to reset the port.
. Note:A Reset Port dialog box will open requesting a password before resetting the port if
you have previously set up the security password using NPort Lite Manager. If you
didn’t setup the security password, the following dialog box won’t be displayed.
3. Enter the password and then click OK. If you entered an incorrect password, the
following window will open. Click OK and then reenter the password.
4. After reentering the password, click OK. The following window will open to verify
that the serial port reset operation has completed.