User`s manual

4-52 NPort Server Lite User’s Manual
1. Click on File and choose Load Configuration, or simply click on the toolbar Load
Configuration icon.
2. Navigate to the directory that contains the configuration file you would like to load
(recall that the file extension is .mnt).
3. Click on the file name, or type the name into the File name text input box.
4. Click on Open to load the selected configuration file.
Monitor
After a configuration has been set up, or a configuration file has been loaded,
NPort Server Monitor will automatically start monitoring servers and ports. You can refer
to the figure below for an example of the type of monitoring information that will be
displayed. (Check the Help menu to find additional information about using this program.)
NPort Server Monitor will use colors to differentiate the current status of server ports.
q Black means that the port is currently hooked up to your LAN and is active.
q Red means that the port is currently not accessible. It could either be inactive, removed
from the LAN, or have a routing error.
q Pink means that two or more NPort Server Lites have been assigned the same IP
address. You must use NPort Lite Manager to rectify the situation.