User`s manual

4-48 NPort Server Lite User’s Manual
1. Click on the Monitor menu and select Configure, or click on the toolbar Configure
icon to open the Monitor configuration window.
Note the three tabs, Select Port, Select Item, and General, located towards the top of
the window. The Select Port tab will be selected by default, and the program will find
all NPort Server Lites currently connected to the network.
2. From the Server IP Address pull down menu, select the server(s) that you want to
monitor. The server information will appear in the Monitoring NPort Server info box.
.Note:Click the Search button before selecting a server from the pull down list if you add
more NPort Server Lites after the Diagnostics utility is initiated. Otherwise the new
server will not be listed in the pull down list.
3. The check box for all ports needing to be monitored should be checked (refer to the
figure in step 2). For those ports that no longer need monitoring, click inside the
checked box to remove the check mark.