User`s manual

Installation and Configuration

NPort Server Lite User’s Manual 4-41

5. If the NPort Server Lite you chose is password protected, the following window will

open. Type in the correct password and then click OK.

6. The server information will now appear in the Selected NPort Server info box.

. Note: Click the Search button before selecting a server from the pull down list if you add

more NPort Server Lites after the Diagnostics utility is initiated. Otherwise the new

server will not be listed in the pull down list.

7. The check box for ports needing to be tested should be checked (refer to the figure in

step 6). For those ports that no longer need to be tested, click inside the checked box to

remove the check mark.

8. If you do not need to change any Test Items or Communication Parameters, click

OK to return to the NPort Server Diagnostics window. Otherwise continue the

configuration process in the next subsections.