User`s manual

Installation and Configuration
NPort Server Lite User’s Manual 4-11
Unmap Port
If you do not need to use a port any more, you may use the toolbar Unmap Port function to
remove it from your Windows NT/95/98 operating system.
1. Click on the server you would like to
modify. The port on that server will be
listed in the right info box.
2. Click on the port to highlight it.
3. Click on the Unmap Port icon to remove
the selected port. In the example shown
here, we deleted Port 1, as indicated by the “ellipses” (…) under COM, and a missing
“plug” icon under Port.
Server Properties—Change Name
You may modify the server name by using the toolbar
Properties function.
1. Click on the server whose name you want to
change.
2. Click on the toolbar Properties icon.
3. Modify the server name as desired.
4. Click OK to save the configuration.
Server Properties—Change Password
To add more security to your NPort Server Lite, it is highly recommended that you set a
password as soon as you complete the installation. If you did not set the password while
running Add Server Wizard, or you would like to change the current password, you may
use the toolbar Properties function to do so.