User`s manual

Configuring the Network
NPort Server Lite User’s Manual 3-5
4. A connection between your computer and NPort Server Lite should now be established,
and the MOXA NPort Server Lite utility program will automatically start running.
5. Use the keyboard arrow keys to highlight [serverConfig] as shown below, and then
press Enter to select this option.
6. A window showing the various parameters required to configure NPort Server Lite
opens up. Those parameters that are “configurable” are enclosed in square brackets,
and those parameters that are “display only” are not enclosed.
7. Since our goal in this section is to set the IP address of the server, use the keyboard
arrow keys to position the cursor over the first digit of the IP address.
8. Type in the correct IP address and then press Enter to accept this value.
9. Press ESC to return to the main menu, and then select Restart to activate the change.