User`s manual

Telnet Console
NPort Server Lite User’s Manual A-5
If you find that you chose the wrong setting, simply press Enter again to reactivate the
pop-up window, and choose the correct setting.
When all of the settings are correct, press the Esc key to return to the MAIN MENU.
Serialport Options
Starting from the Telnet Console Interface MAIN MENU, use the arrow keys to position
the cursor over the Serialport menu, and then press Enter to display the options Port
Number, Baud Rate(bps), Parity, Data Bit, Stop Bit, Flow Control, Alive timeout(0-99
min), and Tx FIFO.
Note that the above screen applies to a 1-port NPort Server Lite with Operating Mode set to
Pair-Connection. If the Operating Mode is set to Host-Based, the only configurable setting
is Tx FIFO.