User`s manual

DA-710 Series Hardware Manual BIOS Setup
3-8
IDE Channel 0 Master/Slave UDMA
Ultra DMA functionality can be implemented if it is supported by the IDE hard drives in your system. Your
operating environment also requires a DMA driver (Windows 95 OSR2 or a third party IDE bus master driver).
If your hard drive and system software both support Ultra DMA, select “Auto” to enable BIOS support.
Options: Auto (default), Disabled
SATA Mode
IDE (default): This option configures the Serial ATA drives in IDE mode.
AHCI: This option allows the Serial ATA devices to use AHCI (Advanced Host Controller Interface).
Onboard Device
Onboard LAN Boot ROM
Decides whether to invoke the boot ROM of the onboard LAN chip.
Options: Enabled, Disabled (default)