User`s manual

DA-710 Series Hardware Manual BIOS Setup
3-6
On-Chip Frame Buffer Size
This item determines the frame buffer size for the VGA function, and will share the system memory.
Options: 1 MB, 8 MB (default)
DVMT Mode
Sets the Dynamic Video Memory Technology operating mode. When set to “Fixed,” the graphics driver will
reserve a fixed portion of the system memory as graphics memory. When set to “DVMT,” the graphics driver
will dynamically allocate system memory as graphics memory, according to system and graphics requirements.
When set to “BOTH,” the graphics driver will allocate a fixed amount of memory as dedicated graphics memory,
as well as allow more system memory to be dynamically allocated between the graphics processor and the
operating system.
Options: FIXED, DVMT (default), BOTH
DVMT/FIXED Memory Size
Sets the maximum amount of system memory that can be allocated as graphics memory.
Options: 64 MB, 128 MB (default).
PnP/PCI Configurations
Init Display First
This item allows you to decide whether the PCI interface or onboard graphic chip is activated first.
Options: PCI (default), Onboard
Resources Controlled By
The BIOS can automatically configure all boot and Plug and Play compatible devices. If you choose Auto, you
will not be able to assign IRQ and memory base address fields manually, since the BIOS will assign them
automatically.
Options: Auto (default), Manual