User`s manual

DA-710 Series Hardware Manual Hardware Installation
2-15
4. Carefully slide the module into the clutch at an angle, and then push downward. Make sure the module has
been firmly inserted and is oriented correctly.
Installing a CompactFlash Card
The DA-710 embedded computer comes with a CompactFlash socket. To insert a CompactFlash card, follow
these instructions.
1. Disconnect the DA-710 from its power source.
2. Unscrew the cover of the DA-710. The CompactFlash socket is located in the middle of the main board, just
below the DOM socket. See the following figure for details.
3. Insert the CompactFlash card into the socket, and then push upward.
4. Make sure the CompactFlash card has been firmly inserted.