User`s manual

DA-710 Series Hardware Manual Hardware Installation
2-13
Connecting USB Devices
The DA-710 embedded computer has four USB 2.0 ports on the rear panel. All of the ports are UHCI, Rev 2.0
compliant and support Plug & Play and hot swapping. These ports can be used to connect USB devices, such as
a keyboard, mouse, USB flash disk, and USB CD-ROM. In addition, both USB ports support system boot up,
which can be activated by modifying the BIOS settings. The chapter “BIOS Setup” describes the configuration
process in detail.
Gigabit LAN Ports
The DA-710 has 4 Gigabit LAN ports. When the cable is properly connected, the LEDs on the RJ45 connectors
will glow to indicate a proper connection.