User`s manual

DA-710 Series Hardware Manual Hardware Installation
2-3
Step 2: Attaching the rackmount hanger to the support.
Use 2 FMSM5X10 screws to attach the rackmount hanger to the ear of the rackmount support. Repeat this
procedure for the second support and hanger.
Step 3: Attaching the rackmount support to the DA-710.
Use 8 FMSM4X6 screws to attach one rackmount support to one side of the DA-710. Repeat this procedure for
the second support and hanger.
Step 4: Installing the DA-710 to a rack.
Gently slide the DA-710 onto the rack, and then use screws provided by the rack supplier to fix the rackmount
support to the rail.
Note that four screws are required to attach the DA-710 to the rack. Use two screws on each side.