User`s manual

DA-710 Series HW User’s Manual BIOS Setup
5. Press “+” to move it up to the first priority, and press “Esc” to exit the setup menu.
6. Make sure the first boot device is Hard Disk. If it isn’t, press Enter to change it.
7. Select Exit Æ Save & Exit Setup and then press Enter.
8. Choose Y to save to the CMOS and then exit.
Step 4: Run awdflash.exe to upgrade the BIOS.
1. If the BIOS Setup is correct, it will restart and boot from the USB disk.
2. Run awdflash xxxxxxx.Sxx from the command line to upgrade the BIOS. Replace
xxxxxxx.Sxx with the BIOS binary file name discussed in Step 2.
3. Press F1 to reset the system after the bios update is complete. The system should reboot at this
time.
3-18