User`s manual

DA-710 Series HW User’s Manual BIOS Setup
SuperIO Device
Onboard Serial Port 1/2
Select the function of serial ports 1 and 2. You may disable them if you do not want to use these
two ports.
Options: Disabled, 3F8/IRQ4 (Port 1)(default), 2F8/IRQ3 (Port 2) (default)
PWRON after PWR-Fail
This field determines whether your system will boot after restoring power following a power
failure. If you select “On,” the system will boot after restoring power following a power failure. If
you select “Former-Sts” (Former Status), the system will boot or not, depending on the status
before the power failure.
Options: Off, On (default), Former-Sts.
3-10