User`s manual

DA-710 Series HW User’s Manual BIOS Setup
On-Chip Channel 0 PCI IDE
This option lets you enable or disable the IDE channel.
Options: Disabled, Enabled (default)
IDE Channel 0 Master/Slave UDMA
Ultra DMA functionality can be implemented if it is supported by the IDE hard drives in your
system. Your operating environment also requires a DMA driver (Windows 95 OSR2 or a third
party IDE bus master driver). If your hard drive and system software both support Ultra DMA,
select “Auto” to enable BIOS support.
Options: Auto (default), Disabled
SATA Mode
IDE (default): This option configures the Serial ATA drives in IDE mode.
AHCI: This option allows the Serial ATA devices to use AHCI (Advanced Host Controller
Interface).
Onboard Device
Onboard LAN Boot ROM
Decides whether to invoke the boot ROM of the onboard LAN chip.
Options: Enabled, Disabled (default)
3-9