User`s manual

DA-710 Series HW User’s Manual BIOS Setup
PnP/PCI Configurations
Init Display First
This item allows you to decide whether the PCI interface or onboard graphic chip is activated first.
Options: PCI (default), Onboard
Resources Controlled By
The BIOS can automatically configure all boot and Plug and Play compatible devices. If you
choose Auto, you will not be able to assign IRQ and memory base address fields manually, since
the BIOS will assign them automatically.
Options: Auto (default), Manual
IRQ Resources
When resources are controlled manually, you can assign each system interrupt to Reserved or PCI
device. This is only configurable when “Resources Controlled By” is set to “Manual.”
Options: IRQ 3, 4, 5, 7, 10, 11 for PCI device.
3-7