User`s manual

DA-710 Series HW User’s Manual Hardware Installation
Step 3: Attaching the rackmount support to the DA-710.
Use 8 FMSM4X6 screws to attach one rackmount support to one side of the DA-710. Repeat this
procedure for the second support and hanger.
Step 4: Installing the DA-710 to a rack.
Gently slide the DA-710 onto the rack, and then use screws provided by the rack supplier to fix the
rackmount support to the rail.
Note that four screws are required to attach the DA-710 to the rack. Use two screws on each
side.
2-4