User`s manual

DA-710 Series HW User’s Manual Hardware Installation
Follow these steps to install the DA-710 on a rack.
Step 1: Reviewing your components.
Take the rackmount supports out of their packages. There are two packages, each of which
contains 1 rackmount support, 1 rackmount hanger, 2 FMSM5X10 screws, and 8 FMSM4X6
screws.
Step 2: Attaching the rackmount hanger to the support.
Use 2 FMSM5X10 screws to attach the rackmount hanger to the ear of the rackmount support.
Repeat this procedure for the second support and hanger.
2-3