User`s manual

DA-710 Series HW User’s Manual Introduction
Hardware Specifications
Computer
CPU: Intel Celeron M 2.0 GHz processor
OS (pre-installed): Windows Embedded Standard 2009, Linux 2.6
System Chipset: Intel GLE960 + ICH8M
BIOS:
8 Mbit SPI Serial Flash, PCI Plug & Play, ACPI function
support
FSB: 533 MHz
System Memory:
1 x 200-pin DDR2 SODIMM socket supporting DDR2 533; up
to 2 GB max. (1 GB built-in)
USB: 4 x USB 2.0 compliant hosts, Type A connector
Storage
Built-in:
1 GB for Linux, 2 GB for XPe DOM onboard to store OS via
IDE interface
Storage Expansion: CompactFlash socket
HDD Support: 2 x SATA connector, 1 x EIDE (UDMA33) connector
Other Peripherals
KB/MS:
1 PS/2 interface, supports standard PS/2 keyboard and PS/2
mouse
Display
Graphics Controller: Integrated Intel graphics media accelerator (GMA X3100)
Display Memory: Dynamic video memory technology
Intel Clear Video Technology: MPEG-2 hardware accelerator, Microsoft DirectX 9
Display Interface: CRT interface for VGA output (DB15 female connector)
Resolution: QXGA maximum with resolution up to 2048 x 1536 at 60 Hz
Ethernet Interface
LAN: 4 auto-sensing 10/100/1000 Mbps ports (RJ45)
Magnetic Isolation Protection: 1.5 KV built-in
Serial Interface
Serial Standards: 2 RS-232 ports (DB9 male)
ESD Protection: 4 KV for all signals
Serial Communication Parameters
Data Bits: 5, 6, 7, 8
Stop Bits: 1, 1.5, 2
Parity: None, Even, Odd, Space, Mark
Flow Control: XON/XOFF
Baudrate: 50 bps to 115.2 Kbps
Serial Signals
RS-232: TxD, RxD, DTR, DSR, RTS, CTS, DCD, GND
Digital Input
Input Channels: 4, source type
Input Voltage: 0 to 30 VDC
1-7