User`s manual

DA-683 XPE User's Manual System Recovery
Click OK when the recovery process is complete and system will reboot.
Step 5: Change the BIOS Setting to Boot from Original Disk.
Now, you need to change the boot priority so that it can boot from the original disk. As the system reboots,
press DEL to enter BIOS setup menu. Select Hard Disk Boot Priority and press Enter. Make sure that the
hard disk has first boot priority.
Press F10 and then press Enter to save and leave the BIOS settings.
Step 6: Reboot the Computer.
Remove the USB disk from the USB port before restarting and rebooting the DA-683-XPE. You need to wait for
about ten to fifteen minutes while the system recovers. DO NOT power off or shut down the computer
during this time. When the operating system has successfully launched, you need to restart your computer so
that the new settings can be activated.
4-8