User`s manual

DA-681 Series Hardware User’s Manual BIOS Setup
Onboard I/O Chip Setup
Debug Port
Select an address and corresponding interrupt for this debug port. This port is only for engineers
who are debugging programs.
Options: Disabled (default), 3F8/IRQ4
PWRON after PWR-Fail
This field determines whether your system will boot after restoring power from a power failure. If
you select “On,” the system will boot after restoring power from a power failure. If you select
“Former-Sts” (Forrner Status), the system will boot or not, depending on the status before the
power failure.
Options: Off, On (default), Former-Sts.
Power
The Power Setup Menu allows you to configure your system power-up/ power-down options.
3-12