Specifications

Serial Media Converters >
Device Connectivity
13-5
[e-mail]
www.moxa.com
Product Selection Guide
Device Connectivity
13
CAN-to-Fiber, PROFIBUS-to-Fiber
Converters
ICF-1170I-M-ST
ICF-1170I-M-ST-T
ICF-1180I-M-ST/ST-T
ICF-1180I-S-ST/ST-T
Optical Fiber Side
Fiber Connector
ST
Cables Requirements
Multi-mode: 50/125, 62.5/125, or 100/140 μm
Transmission Distance
Up to 2 km
Multi-mode: 4km
Single-mode: 45km
Wavelength
Multi-mode: 850 nm
Multi-mode: 850 nm
Single-mode: 1310 nm
Tx Output
Multi-mode: > -5 dBm
Multi-mode: > -12 dBm
Single-mode: > -8 dBm
Rx Sensitivity
Multi-mode: -20 dBm
Multi-mode: -29 dBm
Single-mode: -29 dBm
Fieldbus Interface
Connector
3-pin removable screw terminal DB9 female
Specification
CAN 2.0 A and 2.0B (ISO 11898-2) PROFIBUS DP (IEC 61158-2)
Signal Support
CAN _H, CAN_L, CAN_GND PROFIBUS D+, PROFIBUS D-, RTS, Signal common, 5V
Optical Isolation
2 KV
Transfer rate
Up to 1 Mbps Up to 12Mbps
Termination Resistors
120 ohms (selected by DIP switch)
Physical Characteristics
Housing
Metal
Dimensions (mm)
30.3 x 70 x 115 mm (11.9 x 27.6 x 45.3 in)
Environmental Limits
Operating Temperature
Standard Temperature 0 to 60°C
Wide Temperature -40 to 85°C -40 to 75°C
Operating Humidity
5 to 95% RH
Storage Temperature
-40 to 85°C -40 to 75°C
Power Requirements
Input Voltage
12 to 48 VDC dual power inputs for redundant power
Power Consumption
221 mA @ 12 V -
Voltage Reversal Protection
Protects against V+/V- reversal
Over Current Protection
1.1 A (protects against two signals shorted together)
Standards and Certifications
Safety
UL 508, EN 60950-1 UL 60950-1, EN 60950-1
EMC
CE, FCC
EMI
EN 55022 Class A, FCC Part 15 Subpart B Class A EN 55022 Class A, FCC Part 15 Subpart B Class A
EMS
EN 61000-4-2 (ESD) Level 4,
EN 61000-4-3 (RS) Level 2,
EN 61000-4-4 (EFT) Level 4,
EN 61000-4-5 (Surge) Level 3,
EN 61000-4-6 (CS) Level 2,
EN 61000-4-8 (PFMF) Level 3
-
Freefall
IEC 60068-2-32 -
Green Product
RoHS, CRoHS, WEEE -
Reliability
Warranty
5 years (see www.moxa.com/warranty)