User`s manual

PCI Express Board User's Manual Driver Installation: Windows Vista/2008
3-44
Configuring the Ports
After the driver has been installed, use Device Manager to configure the CP-118EL serial ports.
1. Click Start
 Settings  Control Panel  System, select the Hardware tab, and then click Device
Manager.
2. Expand the Multi-port serial adapters tab, right click Moxa CP-118EL Series (PCI Express Bus), and
then click Properties to open the board’s configuration panel.
3. Basic information about the board is displayed on the General page. Click the Ports Configuration tab to
configure the board’s serial ports.