User`s manual

PCI Express Board User's Manual Driver Installation: Windows Vista/2008
3-25
NOTE
If you have already installed a CP
-118EL-A or other Moxa PCI Express board in your computer, and you are
installing additional boards, Windows 2003/XP will automatically detect and install the new board(s) the next
time you boot up the computer. In this case, proceed directly to the next section, “Configuring the Ports,” to
configure the ports’ serial transmission parameters.
1. After plugging the board into an expansion slot and powering on your PC, Windows XP will automatically
detect the new board, and the Found New Hardware balloon will open in the bottom right corner of the
Windows desktop.
2. The Welcome to the Found New Hardware Wizard window will open automatically. This window will
offer to connect to the Windows update site to search for a driver. Select No, not at this time and click
Next to continue.
3. Select Install from a list or specific location (Advanced), and then click Next to continue