User`s manual

CA Series User’s Manual Software Installation
3-56
Loading the Driver
After setting up the driver, you must load the driver in order to gain access to the serial ports on
the module. Run BIN\DPC-DRV.EXE at the DOS prompt. The driver will detect your CA Series
module automatically. You should see messages indicating successful detection of your module,
such as the following:
PC/104 Communication Module DOS driver Version 1.0
Setup driver …
CA-104 series OK!
Device driver setup O.K.
At this point, you can execute applications that support API-232 functions, or start developing
applications using the API-232 library.
Unloading the Driver
To unload or release the CA Series driver from memory, enter DPC-DRV/Q at the DOS prompt.
Windows CE 5.0
In this section, we explain how to install Moxa CA series boards under WinCE 5.0. These
instructions are intended for users who are familiar with the Windows CE Platform Builder 5.0
ToolKit, and would like to install one or more Moxa Tech products. Here, we only give the
step-by-step installation instructions for the development environment. You will need to download
the image file to the target host yourself.
The WinCE 5.0 driver for the MOXA CA Series PC/104 Multiport Serial Module supports the
following products:
y CA Series: CA-108, CA-114, CA-134I, CA-104, CA-132, CA-132I.
The following steps are using CA-104 as an example
Installing the driver
The following procedure explains how to install the CA-104 multiport serial module driver under
WinCE.
1. Obtain a copy of the MOXA Tech WinCE 5.0 driver package and extract it to your computer.
Double click the Installation icon to copy the Mxpcdrv folder to
%WINCEROOT%\PLATFORM\ automatically, and import the supported MOXA Tech
products into the Folder.