User`s manual

CP-132 Series Software Installation
3-18
3. You may now enter/modify each port’s configuration. These displayed values are the port initial values as
driver is loaded.
Legend:
Some noticeable fields and functions are explained below.
Port number:
This is actually the port ID of each port. The application software will refer to the port
by its port number (ID). Duplicated port number is not allowed. That is, each MOXA
serial port is referred to as port number in terms of serial programming.
You may map the port number range to the one you prefer between 0 and 255 as
long as no port number overlapping condition or port number undefined condition
occurs. Generally, you should take the convenience of programming into
consideration when specifying the port numbers for the board.
TxD buf size:
The transmit (output) buffer allocated in the system for each port.
RxD buf size:
The receive (input) buffer allocated in the system for each port.
F5: Group edit:
This is a convenient function that helps you edit the configuration of several ports at
one time as a group.
4. To setup more boards, please follow the same instructions 2 to 3 described above.