User`s manual

CP-132 Series Software Installation
3-17
Driver Setup
The following are steps for setting up the Industio CP-132 Series driver. Note that it is not intended to illustrate
all the convenient functions of the setup programs when configuring the boards.
1. Run the setup program, BIN\SETUP.EXE, in the API-232 directory.
2. Press Enter to pop up the SETUP dialog box. In the SETUP dialog box, select the “CP-132 Series” in the
“Type” field and set up all the ports of the board with the desired “Port number”, which should not conflict
with other port number in use.
NOTE
Up to now you have completed the setup for Industio CP
-132 Series board. You may skip this step and go
directly to the next
step 5 if you need not change any setting or configure any board.