User`s manual

CP-132 Series Software Installation
3-13
6. Re-assign the Rx FIFO Trigger by selecting a number from the pull-down list. Check Set the change to all
ports check-box if desire to apply this setting to all ports.
Rx FIFO trigger levels, at 1, 4, 8 or 14 bytes, are available, and the default value is 14 bytes.
7. Re-assign the Tx FIFO Size by selecting a number from the pull-down list. Check Set the change to all ports
check-box if desire to apply this setting to all ports.
Tx FIFO sizes from 1 to 16 bytes are available, and the default value is 16 bytes.
8. Click [OK] button in Port X dialog box.
9. Click [OK] button in CP-132 Series Properties dialog box.
10. Click [OK] button in Device Manager tab.
11. Restart the system to activate the latest configuration.